Capstan Eye Anchors
The Capstan Eye Anchor is for use when the transfer of load is not possible through the foot of a standard anchor. This is usually for thin reinforeced units or lightweight concrete. Reduced bond stress may need to be considered for lightweight concrete.
The re-bar tail must be in tight contact with the bottom of the hole to prevent concrete breakout when lifting, and the tail must have a 30o bend.
This anchor is available in 1.3t - 20.0t loads groups and each anchor is stamped with the manufacturers identification mark, safe working load rating of the anchor, the batch number and CE mark.
Please refer to RFA-Tech's Precast Product Guide and Technical Manual for further technical information.