Self Adhesive Waterproofing Membranes
Bitusheet XL Membrane
Bitusheet XL is a high performance self adhesive membrane used below ground for the tanking of basements and waterproofing of sub structures. It can also be used as a ground floor DPM. Bitusheet XL consists of self bonding polymer modified bitumen which is covered on one side by a tough cross laminated polythene film and protected on the other side by a release sheet.
Use with Bitusheet Primer and protection boards.
Roll size 20m² (1.05m x 19.05m). Roll thickness 1.5mm.
Bitusheet SBS Protection Board
Bitusheet SBS Protection Board is a tough, flexible polymeric board designed for both horizontal and vertical applications to protect waterproofing membranes against abrasive backfill materials, and poured concrete. The board should be butt jointed and supported during backfilling. Bitusheet Double Sided Tape should be used to spot bond the protection board to the membrane. The joints should be staggered and also staggered over the membrane laps.
Available in 3mm thickness. Sheet size 2m x 1m
Bitusheet Primer
Bitusheet Primer is a one part bituminous solution used for sealing porous concrete surfaces to promote adhesion of self-adhesive waterproofing membranes such as Bitusheet XL.
Available in 5 litre and 25 litre drums.
Bitusheet XL Tape
Bitusheet XL Tape is an adhesive bitumen based tape used for reinforcing all internal and external edges, intersections and roof expansion joints. The 100mm width is used to seal the overlaps of Dual Seal Membrane and also protect the cut end overlaps of Bitusheet Gas Barrier Membrane.
The tape is available in standard roll widths of 100mm, 150mm and 300mm. Roll length 20m.
Bitusheet Double Sided Tape
A double sided adhesive bitumen tape which has been developed for fixing protection boards to membranes; sealing overlaps between polythene sheets and for joining laps of DPCs.
The tape is available in standard roll widths of 100mm, 150mm and 300mm. Roll length 10m
To download a copy of our Waterproofing Brochure click here.