Capstan Rubber Recess Former & Screw

The Capstan Anchor must be installed using the correct Rubber Recess Former that holds the anchor securely in place during casting. This provides quick and secure installation and forms a recess for the shackle. Only the correct former will fit the anchor, and the load group is marked on each one. The former can be used by floating in the concrete, or by bolting through the formwork.

The rubber former is resistant to oil and retains its shape in temperatures up to 120⁰C. The former is reusable many times if correctly used and cleaned after each use. Mould oil should be applied to the former before the anchor is inserted. Short-sided formers are also available on request and are for use when lifting thin panels.

The Rubber Recess Former is available in 1.3t - 32.0t load groups.