Downloads - Chemical Product Safety Data Sheets

A unique, environmentally friendly, water based concrete curing membrane of aqeous resin emulsion containing fine particles of hydrocarbon resin. Held in suspension by carefully selected emulsifiers, when applied to freshly placed concrete act as a curing agent with an efficiency in excess of 90%.

View PDF

A cementitious free flowing and self-compacting concrete, based on non-reactive aggregates, low alkali Portland cements with selected admixtures to produce chloride free concrete which contains no corrosive metallic additives. Nugrout Flowable Concrete is designed for structural repair situations and complies with the requirements of the Department of Transport Standard BD27/86 Clause 4, as well as with the requirements of BS EN1504 Part 3 Class R4.

View PDF

A pre-mixed polyester resin paste to which a small amount of reactive hardener paste is added to produce a fast setting compound, highly resistant to impact, abrasion, oil, water, and concrete alkalis. Specially formulated for the rectification of surface damage and irregularities on all types of timber and metal formwork, and for the filling of small imperfections and cracks in concrete surfaces.

View PDF

An aqeous solution of metallic silicates which when applied to fresh concrete forms a micro-crystalline seal in the pores, reducing the evaporation of moisture from the mix thus assisting in the efficient curing of the concrete. The aqeous element of Chemcure S will evaporate into the atmosphere and the silicates become an integral part of the concrete, leaving no residues or deleterious material on the concrete surface.

View PDF

A specially formulated mould release agent for use on all types of formwork to give an excellent release and first class finish. This product is water based, non-flammable and consists of highly refined fatty acid esters emulsified in water using bio-degradable surfactants.

View PDF

A high strength free flowing cementitious grout based on non-reactive aggregates, shrinkage compensated Portland cements and selected admixtures which produce a chloride free grout. Nugrout Hi-Spec contains a maximum nominal size aggregate of 2mm and is suitable for grouting thicknesses over 5mm. Nugrout Hi-Spec has been formulated to comply with the requirements of EN1504 Part 3 Class R4.

View PDF

Nulease is a specifically formulated system designed to give the maximum protection to all types of timber formwork and moulds made of concrete to ensure production of high quality concrete finishes. Nulease Standard is recommended for sealing and protecting general formwork where the criteria is for multiple re-use.

View PDF

A water based acrylic urethane clear sealer designed for applications onto wood and concrete formwork. This environmentally friendly product is characterised by its rapid drying, hard wearing, non-yellowing properties which gives maximum protection to timber formwork and moulds and helps ensure reproduction of high quality concrete finishes.

View PDF